Home

ADDON DAC-SFP-10G-3M COMP 3M TAA 10G-CU PASSIVE SFP+ DAC - TAA Compliance

ADDON DAC-SFP-10G-3M  COMP 3M TAA 10G-CU PASSIVE SFP+ DAC - TAA Compliance

Business/Services/Hardware

ADDON DAC-SFP-10G-3M COMP 3M TAA 10G-CU PASSIVE SFP+ DAC - TAA Compliance

RPI-HIFI-DAC PCM5122 HIFI DAC Audio Card Expansion Board For Raspberry Pi 3 Model B/2B/B+

RPI-HIFI-DAC PCM5122 HIFI DAC Audio Card Expansion Board For Raspberry Pi 3 Model B/2B/B+

Overview: The Raspberry pi mother board has one major problem with i2s audio interface. The clocks coming from CPU can only output one frequency clock perfect, resulting in major problems with audio files sampled at 44khz and multiple. Too much jitter on i2s clocks. So we enter the master mode for i2s. Instead of the RPI giving the clock on the line, the DAC itself sends the clocks and RPI sends the data (file tobe played). Since we used 2 clocks the problem above solved. RPI-HIFI-DAC is unique, because of the way we have implemented the design. First we separated the power on 3 channels and filter it: one for the digital side, the second for analog and third for the clocks themselves. We use some of the good brand LDOs on the market. In addition, we used two oscillators with very low jitter for clock units. Finally, on the analog stage we are using a film capacitor (not ceramic) for a quiet DC to feed the TI IC to reduce signal distortion. Features: Dedicated 384kHz/32bit high-quality DAC PCM5122 for best sound quality. Audio output connectors: 2x RCA (LEFT &Right) &3.5mm head phone Jack. With 138mw headphone Amplifier can directly drive headphone. Work status indicators facilitate the understanding of the system working status. HAT size. DAC SNR is 112Db . DAC THD+N @ -1 dBFS -78dB. Full Scale Output of DAC is 2.1Vrms. Dynamic Range of DAC is 112dB Sampling Frequency ranges from 8kHz to 384kHz Ultra-low noise voltage regulators for optimal audio performance. Integrated EEPROM for automatic configuration(Option). Automatically switching frequencies according to the input I2S signals. Dual low jitter crystal oscillators for Master Clock generation. Infrared remote control connector (using GPIO26). DAC output coupled with Film capacitor . Hardware connection: Connect the RPI-HIFI-DAC module and RPI with 40 pin connector .While installing the module, please pay attention to align the first leg of the raspberry pi and RPI-HIFI-DAC module. Software Installation: RPI-HIFI-DAC module compatible with many Raspberry pi m

Electronics/Audio

RPI-HIFI-DAC PCM5122 HIFI DAC Audio Card Expansion Board For Raspberry Pi 3 Model B/2B/B+

D-Link DGS-1510-52X Ethernet Switch - 48 Ports - Manageable - 2 Layer Supported - Modular - Twisted Pair, Optical Fiber

D-Link DGS-1510-52X Ethernet Switch - 48 Ports - Manageable - 2 Layer Supported - Modular - Twisted Pair, Optical Fiber

The DGS-1510 Series Gigabit Stackable Smart Managed Switches consists of: DGS-1510-20: 20-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ and 2 SFP ports (smart fans) DGS-1510-28: 28-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ and 2 SFP ports (smart fans) DGS-1510-28X: 28-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans) DGS-1510-28P: 28-Port Gigabit Stackable PoE Smart Managed Switch including 2 10G SFP+ and 2 SFP ports (24 x PoE ports, 193 W PoE budget, smart fans) DGS-1510-28XMP: 28-Port Gigabit Stackable PoE Smart Managed Switch including 4 10G SFP+ (24 x PoE ports, 370 W PoE budget, smart fans) DGS-1510-52: 52-Port Gigabit Stackable Smart Managed Switch including 2 10G SFP+ and 2 SFP ports (smart fans) DGS-1510-52X: 52-Port Gigabit Stackable Smart Managed Switch including 4 10G SFP+ (smart fans) The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G capability, available with 16, 24, or 48 10/100/1000 Mbps ports plus additional fibre ports for physical stacking or uplinks. The PoE-capable DGS-1510-28P and DGS-1510-28XMP switches provide additional flexibility for businesses looking to power IP phones, wireless access points, or IP cameras using existing network infrastructure. The combination of high bandwidth connections and PoE support make the DGS-1510 Series ideal for Small-Medium Enterprise (SME) and Small-Medium Business (SMB) environments. 10G SFP+ Stacking/Uplink Ports The last two SFP+ ports of the DGS-1510 Series switches allow users to create a physical stack of up to 6 units in a fault-tolerant ring or linear topology using Direct Attach Cables (DACs) or any compatible SFP+ transceiver1. This creates a total of 288 Gigabit ports, ensuring high bandwidth while staying cost-efficient. Meanwhile, the remaining uplink ports can be used for other functions, such as connecting to a larger network. Users can also easily configure and manage any of the DGS-1510 Series Smart Managed switches in a single

Business/Services/Hardware

D-Link DGS-1510-52X Ethernet Switch - 48 Ports - Manageable - 2 Layer Supported - Modular - Twisted Pair, Optical Fiber

TRENDnet 24-Port Gigabit Switch with 2 x 10G SFP+ Slots - 24 x Gigabit Ethernet Network, 2 x 10 Gigabit Ethernet Expansion Slot - Twisted Pair, Optical Fiber - Modular - 2 Layer Supported - 1U High - Rack-mountable

TRENDnet 24-Port Gigabit Switch with 2 x 10G SFP+ Slots - 24 x Gigabit Ethernet Network, 2 x 10 Gigabit Ethernet Expansion Slot - Twisted Pair, Optical Fiber - Modular - 2 Layer Supported - 1U High - Rack-mountable

TRENDnet''s 24-Port Gigabit Switch with 2 x 10G SFP+ Slots, model TEG-30262, provides high bandwidth performance, ease of use, and reliability, all while reducing power consumption by up to 70%. This 10G SFP switch offers two dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network. With a sturdy metal housing and included rackmount brackets, the 10G SFP switch is well-suited for 19" 1U rack installations. 10G SFP+ Switch Offers two dedicated 10G SFP+ slots for high-speed network connections, providing a cost-effective solution in adding 10G link capability to an SMB network. Fanless Fanless design lowers energy consumption and eliminates operating noise. Rackmount Design With a sturdy metal housing and included rackmount brackets, this 10G SFP switch is well-suited for 19" 1U rack installations. Ports 24 x Gigabit ports and 2 x 10G SFP+ slots for high speed connections Switching Capacity 88Gbps switching capacity Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB) for increased performance Housing Design10G SPF switch with sturdy rack mountable metal housing with included mounting kit Fanless Fanless design lowers energy consumption and eliminates operating noise Energy Savings Embedded GREENnet technology reduces power consumption by up to 70% LED Indicators LEDs convey port status
Warning: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Business/Services/Hardware

TRENDnet 24-Port Gigabit Switch with 2 x 10G SFP+ Slots - 24 x Gigabit Ethernet Network, 2 x 10 Gigabit Ethernet Expansion Slot - Twisted Pair, Optical Fiber - Modular - 2 Layer Supported - 1U High - Rack-mountable

StarTech.com Juniper EX-SFP-10GE-DAC-3M Compatible SFP+ Direct-Attach Twinax Cable - 3 m (9.8 ft) - 10 Gbps - Passive DAC Copper Cable - RJ45 Mini-GBIC Cable - 9.84 ft Twinaxial Network Cable for Network Device, Server, Switch - First End: 1 x SFP+ Male N

StarTech.com Juniper EX-SFP-10GE-DAC-3M Compatible SFP+ Direct-Attach Twinax Cable - 3 m (9.8 ft) - 10 Gbps - Passive DAC Copper Cable - RJ45 Mini-GBIC Cable - 9.84 ft Twinaxial Network Cable for Network Device, Server, Switch - First End: 1 x SFP+ Male N

The EXSFP10GEDA3 is a Juniper EX-SFP-10GE-DAC-3M compatible direct-attach copper SFP+ cable that''s designed, programmed and tested to work with Juniper® brand compatible switches and routers and complies with MSA industry standards. This passive Twinax copper cable supports 10 Gigabit Ethernet applications connected through SFP+ (Mini-GBIC) ports. This copper SFP+ cable is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. Designed for high-speed performance, this low-power, low-latency SFP+ cable is a cost-effective alternative to fiber-optic cable assemblies, supporting short-distance applications such as point-to-point in-rack network switch or server connections. StarTech.com SFP Cables All StarTech.com SFP & SFP+ cables are backed by a lifetime warranty and free lifetime multilingual technical support. StarTech.com offers a wide variety of direct-attach SFP cables and SFP modules, providing the convenience and reliability you need to ensure dependable network performance.

Business/Services/Hardware

StarTech.com Juniper EX-SFP-10GE-DAC-3M Compatible SFP+ Direct-Attach Twinax Cable - 3 m (9.8 ft) - 10 Gbps - Passive DAC Copper Cable - RJ45 Mini-GBIC Cable - 9.84 ft Twinaxial Network Cable for Network Device, Server, Switch - First End: 1 x SFP+ Male N

AddOn Juniper Networks SFP-10GE-DAC-7M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 7m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-7M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 7m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks SFP-10GE-DAC-7M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 7m). A 100% Juniper Networks compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 7.00m (22.97ft). This Juniper Networks compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-7M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 7m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-0.5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 0.5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-0.5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 0.5m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks® SFP-10GE-DAC-0.5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 0.5m). A 100% Juniper Networks® compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 0.50m (1.64ft). This Juniper Networks® compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-0.5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 0.5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks SFP-10GE-DAC-5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 5m). A 100% Juniper Networks compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 5.00m (16.40ft). This Juniper Networks compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-3M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-3M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks SFP-10GE-DAC-3M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 3m). A 100% Juniper Networks compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 3.00m (9.84ft). This Juniper Networks compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-3M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-2M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 2m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-2M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 2m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks SFP-10GE-DAC-2M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 2m). A 100% Juniper Networks compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 2.00m (6.56ft). This Juniper Networks compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-2M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 2m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-1M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks SFP-10GE-DAC-1M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

Juniper Networks SFP-10GE-DAC-1M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 1m). A 100% Juniper Networks compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 1.00m (3.28ft). This Juniper Networks compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Juniper Networks'' cable and is built to meet or exceed Juniper Networks'' specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Juniper Networks SFP-10GE-DAC-1M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Sixnet GMFIBER-SFP-50K Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1550nm, 50km, LC) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Sixnet GMFIBER-SFP-50K Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1550nm, 50km, LC) - 100% compatible and guaranteed to work - TAA Compliance

This Sixnet GMFIBER-SFP-50K compatible 1000Base-LX SFP Transceiver operates at 1550nm over Single-Mode Fiber, with a maximum reach of 50km connected via a LC connector, built to meet or exceed the OEM''s specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn Sixnet GMFIBER-SFP-50K Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1550nm, 50km, LC) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Checkpoint CPAC-TR-1SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Checkpoint CPAC-TR-1SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM) - 100% compatible and guaranteed to work - TAA Compliance

This Checkpoint® CPAC-TR-1SX compatible SFP transceiver provides 1000Base-SX throughput up to 550m over multi-mode fiber (MMF) at a wavelength of 850nm using a LC connector. It is guaranteed to be 100% compatible with the equivalent Checkpoint® transceiver. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to ensure that it will initialize and perform identically. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters. All of our transceivers are Trade Agreements Act (TAA) compliant. We stand behind the quality of our products and proudly offer a limited lifetime warranty.

Business/Services/Hardware

AddOn Checkpoint CPAC-TR-1SX Compatible TAA Compliant 1000Base-SX SFP Transceiver (MMF, 850nm, 550m, LC, DOM) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Molex 747521301 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Molex 747521301 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

Molex 747521301 compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 3m). A 100% Molex compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 3.00m (9.84ft). This Molex compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Molex''s cable and is built to meet or exceed Molex''s specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Molex 747521301 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Intel XDACBL5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Intel XDACBL5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

Intel XDACBL5M compatible 10GBase-CU SFP+ to SFP+ direct attach cable (Passive Copper, 5m). A 100% Intel compatible 10GBase-CU SFP+ to SFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 5.00m (16.40ft). This Intel compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to Intel''s cable and is built to meet or exceed Intel''s specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Intel XDACBL5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks QFX-SFP-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Juniper Networks QFX-SFP-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

This Juniper Networks QFX-SFP-DAC-5M compatible 10GBase-CU SFP+ Transceiver operates over Passive Twinax, with a maximum reach of 5m, built to meet or exceed the OEM''s specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn Juniper Networks QFX-SFP-DAC-5M Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 5m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Replacement for HP JG326A Compatible TAA Compliant 40GBase-CU QSFP+ to QSFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Replacement for HP JG326A Compatible TAA Compliant 40GBase-CU QSFP+ to QSFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

JG326A compatible 40GBase-CU QSFP+ to QSFP+ direct attach cable (Passive Copper, 1m). A 100% HP compatible 40GBase-CU QSFP+ to QSFP+ twinax direct attached cable that operates over passive copper, with a maximum reach of 1.00m (3.28ft). This HP compatible twinax cable has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. Our direct attached cable will initialize and perform identically to HP''s cable and is built to meet or exceed HP''s specifications, and comply with MSA (Multi-Source Agreement) standards. The actual part shipped may have a different part number, but will be functionally identical and 100% compatible. Trade Agreements Act (TAA) versions of this part are available.

Business/Services/Hardware

AddOn Replacement for HP JG326A Compatible TAA Compliant 40GBase-CU QSFP+ to QSFP+ Direct Attach Cable (Passive Twinax, 1m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Netgear AXC763 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Netgear AXC763 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

This NETGEAR AXC763 compatible 10GBase-CU SFP+ Transceiver operates over Passive Twinax, with a maximum reach of 3m, built to meet or exceed the OEM''s specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn Netgear AXC763 Compatible TAA Compliant 10GBase-CU SFP+ to SFP+ Direct Attach Cable (Passive Twinax, 3m) - 100% compatible and guaranteed to work - TAA Compliance

AddOn NetOptics SFPKT-LX Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% application tested and guaranteed compatible - TAA Compliance

AddOn NetOptics SFPKT-LX Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% application tested and guaranteed compatible - TAA Compliance

This NetOptics SFPKT-LX-AO compatible 1000Base-LX SFP Transceiver operates at 1310nm over Single-Mode Fiber, with a maximum reach of 10km connected via a LC connector, built to meet or exceed the OEM's specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn NetOptics SFPKT-LX Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% application tested and guaranteed compatible - TAA Compliance

AddOn Intel ESGBIC35VSX Compatible TAA Compliant 1000Base-SX GBIC Transceiver (MMF, 850nm, 550m, SC) - 100% compatible and guaranteed to work - TAA Compliance

AddOn Intel ESGBIC35VSX Compatible TAA Compliant 1000Base-SX GBIC Transceiver (MMF, 850nm, 550m, SC) - 100% compatible and guaranteed to work - TAA Compliance

This Intel ESGBIC35VSX compatible 1000Base-SX GBIC Transceiver operates at 850nm over Multi-Mode Fiber, with a maximum reach of 550m connected via a SC connector, built to meet or exceed the OEM''s specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn Intel ESGBIC35VSX Compatible TAA Compliant 1000Base-SX GBIC Transceiver (MMF, 850nm, 550m, SC) - 100% compatible and guaranteed to work - TAA Compliance

AddOn RuggedCom 1FG52 Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% compatible and guaranteed to work - TAA Compliance

AddOn RuggedCom 1FG52 Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% compatible and guaranteed to work - TAA Compliance

This RUGGEDCOM 1FG52 compatible 1000Base-LX SFP Transceiver operates at 1310nm over Single-Mode Fiber, with a maximum reach of 10km connected via a LC connector, built to meet or exceed the OEM''s specifications, and comply with MSA (Multi-Source Agreement) standards. All products are 100% functionally tested, and are guaranteed compatible.Our Transceivers (GBIC, SFP, SFP+, X2, XFP and XENPAK) are 100% compliant with their designed networking application, and are factory programed with OEM specific configuration data required for seamless networking compliance. These transceivers initialize and perform identically to the OEM transceivers and can be mixed and deployed with other OEM or 3rd party transceivers, for outstanding network performance.We offer a complete line of OEM compatible network transceiver modules. Now you have a cost effective solution to your network upgrade needs. All our products are functionally tested in their intended application; we guarantee our product will work right the first time.

Business/Services/Hardware

AddOn RuggedCom 1FG52 Compatible TAA Compliant 1000Base-LX SFP Transceiver (SMF, 1310nm, 10km, LC) - 100% compatible and guaranteed to work - TAA Compliance